FREE STRUCTURAL ENGINEERING
PREMIUM models include site specific engineering stamped by a licensed engineering firm for roof and wind loads.
Exterior Stud & Siding Options:
Exterior build out kits include: 2×4 or 2×6 studs, stud fasteners, wood siding, corner blocks
(Foundations must be larger to accommodate build out)
Semi D-Log siding 3/4″ x 5-1/8″ (18mm x 130mm) Add 10% to sale price
Full D-Log siding 1-1/8″ x 5-1/8″ (28mm x 130mm) Add 14% to sale price
Energy efficiency: Our solid wood walls add an additional R 4.4 and have virtually no heat or cold transfer, increasing the overall thermal and comfort benefits
Tip: Mineral wool insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly
Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof 
boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity
OPTION A: Upgrade wood windows to triple glazed / Low E / Argon filled glass
- USD regular price $ 468.00
- CAD regular price $ 600.00
OPTION B: Upgrade wood windows to maintenance free white PVC windows with triple glazed / Low E / Argon filled glass. NOTE: Exterior rolling shutters are NOT available on this model
- USD regular price $ 858.00
- CAD regular price $ 1,100.00
Assembly: The model can be assembled in approximately 4 days with 2 people
Tip: House wraps & vapor barriers are required in most regions when insulating
Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones
Kit includes:
- no floor, ready to assemble on a concrete slab or wood foundation
- pre-cut, numbered exterior walls
- pre-cut, numbered interior walls
- pre-cut, numbered gable components
- 5/12 roof pitch (23 degrees)
- vaulted, cathedral ceilings
- pre-cut 100mm x 200mm (4″x8″) numbered glulam floor beams, spaced 558mm (22″) or less
- pre-cut loft floor boards 28mm (1-18″)
- pre-cut, numbered fascia boards
- 3 single wide wood windows (opening) 915mm x 420mm (36″ x 17″)
- 2 single wide wood windows 515mm x 1890mm (20″x 74″)
- 1 exterior double door 1550mm x 2040mm (61″ x 80″) full glass tempered, multi locking hardware
- hardware for doors & windows
- 2 spare wall logs/spare roof boards
- 8″ log screws to connect each row, gable components, purlins
- packaged/wrapped and marked for sequence of assembly