SITE SPECIFIC STAMPED STRUCTURAL ENGINEERING INCLUDED WITH ALL PREMIUM MODELS
EZ Log Structures do not require skilled trades people just basic construction knowledge is needed to assembly our kits. Each package is numbered in sequence and the precut components stack by number, no cutting. Foundation sizes are provided so you can prepare your foundation of choice. When the kit arrives you require a foundation such as a concrete slab, crawl space, post & beam or basement with a wood subfloor. The kit gets assembled on the foundation, the same as conventional construction
Once the kit has been assembled kitchen cabinets, plumbing, light fixtures, interior electrical, flooring and the finishing of the interior walls can begin immediately without delays as there is no drywall/plaster boards. The 2×6 studs are applied to the exterior, wiring & insulation are installed and the exterior finish is applied. We offer 2 types of wood siding but the exterior can be finished using vinyl, hardboard, cement board siding, stucco or even brick. The result is a home that can blend into any rural or urban environment. The exterior looks like a conventional home but the interior is all natural wood ready to paint or stain
FEATURES & BENFITS
Passes all structural building codes in North America
No skilled labor required, do it yourself or hire a contractor for assembly
Quicker assembly time to dry in stage
Less subtrades required
Environmentally friendly, no plastics, no composites, no drywall required
Virtually no waste
Stronger than conventional construction
No plywood required for walls
QUICK VIEW ASSEMBLY SEQUENCE
INSULATING WALLS – SUPERIOR ENERGY EFFICIENCY
Insulating the exterior is the most efficient method. The main structure is protected from the elements keeping the wood preserved indefinitely. Our 2-3/4″solid wood walls provide an R-value of 4.4. The solid wood wall has virtually no heat or cold transfer, increasing the overall thermal and comfort benefits. Additional R-value is gained from the exterior siding, vapor barrier and house wrap
Our optional insulating/siding kits come with 2×6 studs spaced for 24″ on center. This allows for more insulation to increase total R-values. Any insulation can be used, fiberglass, mineral wool, rigid board insulation or spray foam. Vapor barriers and house wraps may be required based on the local building codes.
Mineral wool insulation is recommended for its superior qualities. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly
INSULATING THE CEILING/ROOF
Rafters are applied to the exterior, over the tongue & groove roof boards. The build up depth is determined by the R-value required to meet local building codes and the type of insulation used. High density spray foam provides maximum benefits and has the highest R-value for thickness & provides a water proof roof
